|
EnviroTex Jewelry Clay® 4 oz blister pack.This clay is a blend of premium epoxy and clay powders resulting in a smooth porcelain like surface that will not shrink when cured. This advanced formula is easy to mix, has a long working time and cures to a hard, durable and impact resistant product. EnviroTex Jewelry Clay® has excellent adhesive qualities and will bond to most surfaces including glass, metal, wood, etc. Once cured, EnviroTex Jewelry Clay® is waterproof, heat and chemical resistant. EnviroTex Jewelry Clay® can be colored while in its uncured form or painted when cured. EnviroTex Jewelry Clay® cures to a firm hardness in 5 hours and full cure in approximately 24 hours at 70° F. EnviroTex Jewelry Clay® Features: Attractive, brightly colored packaging with easy 4 step by step photos. Pleasant, Fresh Citrus Scent. Creamy smooth texture, porcelain like when cured. Reusable, easy to open wide mouth plastic containers. Excellent adhesive qualities. Up to 2 hours working time, 5 hour set (soft, but firm cure) 24-hour full cure. Comprehensive instruction sheet with professional tips-Professional Jeweler's Grade.
|
EasySculpt is a Professional Grade Self-Hardening Epoxy Modeling Clay which cures without firing. Tough & durable, stronger than fired clays, chemical & heat resistant, waterproof, can be sanded, drilled and shaped when cured. Cured pieces can be painted or finished with most paints and finishes. Up to two hours working time, will not shrink, professional grade, smooth porcelain like texture. Press and form EasySculpt® in molds. Excellent adhesion to stones, crystals, glass, metal, wood, etc.
|
EasySculpt is a Professional Grade Self-Hardening Epoxy Modeling Clay
which cures without firing. Tough & durable, stronger than fired
clays, chemical & heat resistant, waterproof, can be sanded, drilled
and shaped when cured. Cured pieces can be painted or finished with
most paints and finishes. Up to two hours working time, will not shrink,
professional grade, smooth porcelain like texture. Press and form
EasySculpt® in molds. Excellent adhesion to stones, crystals, glass,
metal, wood, etc.
|
